FREE 2007, 2008, 2009, and 2010 Cadillac Escalade remote programming do it yourself instructions

Switch ignition ON.
Repeatedly press vehicle information button Fig. 2 [A] until PRESS TO RELEARN REMOTE KEY is displayed.
Press set/reset button Fig. 2 [B] until REMOTE KEY LEARNING ACTIVE is displayed.
Programming mode activated, proceed as follows:
Press and hold LOCK and UNLOCK buttons on first remote transmitter simultaneously for 15 seconds.
Wait for acoustic signal (indicates correct programming).
Repeat above procedure to program remaining remote transmitters.
Switch ignition OFF to exit programming mode.
Remote transmitters can also be programmed using diagnostic equipment.
2007 and up Silverado Sierra Tahoe Suburban Escalade remote instructions image

Leave a Reply

Your email address will not be published. Required fields are marked *

4 × five =