Free Programming instructions for 1995, 1996, 1997, and 1998 Lincoln Continental remote keyless entry fob alarm

How to program your 1995, 1996, 1997, and 1998 Lincoln Continental remote keyless entry fob alarm by yourself at home without going to the dealer.

Enter 5-digit permanent entry code (you can find the code on trunk hinge) into the keyless entry keypad.
Within 5 seconds of pressing last button of code, press the 1/2 button.
All doors will lock then unlock to confirm programming mode.
Press any button on 1st transmitter within 5 seconds of pressing the 1/2 button. Locks will cycle to indicate successful programming.
Press any button on 2nd transmitter (up to 4 transmitters total possible) within 5 seconds of previous
transmitter.
(If the keypad light goes out before all transmitters are programmed,
the entire process must be repeated.)
Press the 7/8 and 9/0 buttons simultaneously on keypad to exit program mode.

Leave a Reply

Your email address will not be published. Required fields are marked *

eleven − eleven =