FREE keyless entry remote fob programming instructions for 2001, 2002, and 2003 Pontiac Grand Prix

This is how to program your 2001, 2002, and 2003 Pontiac Grand Prix keyless entry remote yourself at home without going to the dealer…

Remove key from ignition switch
Remove the “MALL PGM” fuse from the fuse box
Close all doors
Turn ignition switch to the ‘ACC’ position
Within 1 second, turn the ignition switch to ‘OFF’ and then back to ‘ACC’
Open and close the driver’s door. A chime will sound indicating the programming mode is active.
To program the transmitter, proceed as follows:
Press and hold remote transmitter Lock and Unlock buttons until a chime sounds twice (approximately 14 seconds).
Repeat last step for each additional remote transmitter.
Remove key from ignition switch
Refit “MALL PGM” fuse

FREE keyless entry remote fob programming instructions for 1997, 1998, 1999, and 2000 Pontiac Grand Prix

This is how to program your 1997, 1998, 1999, and 2000 Pontiac Grand Prix keyless entry remote yourself at home without going to the dealer…

Remove key from ignition switch
Remove the “MALL PGM” fuse from the fuse box
Close all doors
Turn ignition switch to the ‘ACC’ position
Within 1 second, turn the ignition switch to ‘OFF’ and then back to ‘ACC’
Open and close the driver’s door. A chime will sound indicating the programming mode is active.
To program the transmitter, proceed as follows:
Press and hold remote transmitter Lock and Unlock buttons until a chime sounds twice (approximately 14 seconds).
Repeat last step for each additional remote transmitter.
Remove key from ignition switch
Refit “MALL PGM” fuse

FREE keyless entry remote fob programming instructions for 1989, 1990, 1991, 1992, 1993, 1994, 1995, and 1996 Pontiac Grand Prix

This is how to program your 1989, 1990, 1991, 1992, 1993, 1994, 1995, and 1996 Pontiac Grand Prix keyless entry remote yourself at home without going to the dealer…

Obtain all remote transmitters
Access the programming connector (a single black wire, located behind the panel in the RH trunk)
Jump programming connector to ground
System should not lock and unlock doors to indicate programming mode is actived
* Press and hold Lock and Unlock buttons (at the same time) on remote for approximately 10 seconds.
* System will lock and unlock indicating remote transmitter programmed
Repeat above * procedure for all other remote transmitters
Remove programming connector wire to exit programming mode
-Any existing remotes not programmed during this procedure will be overwritten
-You can have up to 4 transmitters active at one time on this system

FREE keyless entry remote fob programming instructions for 1994, 1995, 1996, 1997, and 1997 Pontiac Grand Am

This is how to program your 1994, 1995, 1996, 1997, and 1997 Pontiac Grand Am keyless entry remote yourself at home without going to the dealer…

Obtain all remote transmitters
Access the programming connector (a single black wire, located behind the panel in the RH trunk)
Jump programming connector to ground
System should not lock and unlock doors to indicate programming mode is actived
* Press and hold Lock and Unlock buttons (at the same time) on remote for approximately 10 seconds.
* System will lock and unlock indicating remote transmitter programmed
Repeat above * procedure for all other remote transmitters
Remove programming connector wire to exit programming mode
-Any existing remotes not programmed during this procedure will be overwritten
-You can have up to 4 transmitters active at one time on this system

FREE keyless entry remote fob programming instructions for 1996, 1997, 1998, 1999, 2000, 2001, and 2002 Pontiac Firebird

This is how to program your 1996, 1997, 1998, 1999, 2000, 2001, and 2002 Pontiac Firebird keyless entry remote yourself at home without going to the dealer…

Swith Ignition OFF
Remove the RADIO Fuse (number 17), from the fuse box (Located at LH end of instrument panel)
Turn the ignition switch from the OFF to RUN position, 3 times within 5 seconds.
End with the ignition switch in the RUN position
The doors will Lock and then Unlock, indicating that the programming mode is active
To program the remote, proceed as follows:
Press and hold the LOCK and UNLOCK buttons simultaneously for approximately 16 seconds.
The doors will Lock and Unlock, indicating programming is complete
Repeat the last procedure for each additional remote
Switch ignition OFF
Refit RADIO fuse (number 17)

FREE keyless entry remote fob programming instructions for 1993, 1994, and 1995 Pontiac Firebird

This is how to program your 1993, 1994, and 1995 Pontiac Firebird keyless entry remote yourself at home without going to the dealer…

IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.

1. Access data link connector (DLC), located next to steering column
2. Using fused jumper (piece of wire, u shaped paper clip) jump connectors G and A in data link connector (DLC)
3. Doors will lock and unlock, indicating programming mode
4. Press any button on a remote once only,
5. Doors will lock, unlock
6. Repeat 4 for an additional remote if you have it
7. Doors will lock and unlock
8. Remove jumper