Free Programming instructions for 2003, 2004, 2005, 2006, 2007, 2008, and 2009 Dodge Viper remote keyless entry fob alarm

How to program your 2003, 2004, 2005, 2006, 2007, 2008, and 2009 Dodge Viper remote keyless entry fob alarm

**YOU MUST HAVE A WORKING/PROGRAMMED REMOTE IN ORDER TO PROGRAM A NEW REMOTE TO THE CAR**
**if you do not have a working remote now.. you must take the new remote to a dealer or locksmith for programming

1. Press (LOCK) button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.
2. Turn ignition to run position. (Allow ignition chimes [UNLOCK] to stop).
3. Using any original (working) transmitter, press the [UNLOCK] button for 4 to 10 seconds.
4. Within the specified 4 to 10 seconds, continue pressing the [UNLOCK] button and press the [PANIC] button for 1 second and release both buttons . A chime will sound to indicate that the transmitter programming mode has been entered (allow 3 seconds for chime to sound).
5. (USE PURCHASED REMOTE) Press [LOCK] and [UNLOCK] buttons simultaneously for 1 second and release (a short chime may sound).
6. Press and release any button on the same transmitter and a chime will sound after successfully programming the transmitter (locks may cycle).
NOTE: A CHIME WILL NOT SOUND ON STEP # 6 FOR THE FIRST TRANSMITTER PROGRAMMED, BUT WILL SOUND UPON PROGRAMMING THE SECOND TRANSMITTER.
7. (YOU MUST REPROGRAM ALL ORIGINAL REMOTES) Repeat steps 5 through 6 to program additional transmitters.
8. Turn ignition to OFF position. Transmitter programming mode will discontinue after 60 seconds . (All transmitter programming must be completed within time specified).

To order a remote or to learn more about this product, please click on the link below:

http://www.carandtruckremotes.com/dodge-remotes-viper-remotes.html

Free Programming instructions for 2001, 2002, 2003, 2004, 2005, and 2006 Dodge Stratus (sedan and convertible) remote keyless entry fob alarm

How to program your 2001, 2002, 2003, 2004, 2005, and 2006 Dodge Stratus (sedan and convertible) remote keyless entry fob alarm

**YOU MUST HAVE A WORKING/PROGRAMMED REMOTE IN ORDER TO PROGRAM A NEW REMOTE TO THE CAR**
**if you do not have a working remote now.. you must take the new remote to a dealer or locksmith for programming


1. Press (LOCK) button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.
2. Turn ignition to run position. (Allow ignition chimes [UNLOCK] to stop).
3. Using any original (working) transmitter, press the [UNLOCK] button for 4 to 10 seconds.
4. Within the specified 4 to 10 seconds, continue pressing the [UNLOCK] button and press the [PANIC] button for 1 second and release both buttons . A chime will sound to indicate that the transmitter programming mode has been entered (allow 3 seconds for chime to sound).
5. (USE PURCHASED REMOTE) Press [LOCK] and [UNLOCK] buttons simultaneously for 1 second and release (a short chime may sound).
6. Press and release any button on the same transmitter and a chime will sound after successfully programming the transmitter (locks may cycle).
NOTE: A CHIME WILL NOT SOUND ON STEP # 6 FOR THE FIRST TRANSMITTER PROGRAMMED, BUT WILL SOUND UPON PROGRAMMING THE SECOND TRANSMITTER.
7. (YOU MUST REPROGRAM ALL ORIGINAL REMOTES) Repeat steps 5 through 6 to program additional transmitters.
8. Turn ignition to OFF position. Transmitter programming mode will discontinue after 60 seconds . (All transmitter programming must be completed within time specified).

To order a remote or for more information, click on the link below:

http://www.carandtruckremotes.com/dodge-remotes-stratus–sedan—convertible–remotes.html

Free programming information for 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, and 2016 Dodge Ram Truck remote keyless entry fob fobik alarm key smart key (with and without remote start)

Unfortunately, there are no do it yourself instructions that will work to program the 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, and 2016 Dodge Ram Truck remote fobik keyless entry fob alarm smart key.
This remote must be programmed by a Chrysler/Jeep/Dodge dealer or a professional automotive locksmith.

To order a remote or for more information, click on the link below:

http://www.carandtruckremotes.com/dodge-remotes-ram-truck-remotes.html

Free Programming instructions for 2003, 2004, and 2005 Dodge Ram Truck remote keyless entry fob alarm

How to program your 2003, 2004, and 2005 Dodge Ram Truck remote keyless entry fob alarm

**YOU MUST HAVE A WORKING/PROGRAMMED REMOTE IN ORDER TO PROGRAM A NEW REMOTE TO THE CAR**
**if you do not have a working remote now.. you must take the new remote to a dealer or locksmith for programming

1. Press (LOCK) button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.
2. Turn ignition to run position. (Allow ignition chimes [UNLOCK] to stop).
3. Using any original (working) transmitter, press the [UNLOCK] button for 4 to 10 seconds.
4. Within the specified 4 to 10 seconds, continue pressing the [UNLOCK] button and press the [PANIC] button for 1 second and release both buttons . A chime will sound to indicate that the transmitter programming mode has been entered (allow 3 seconds for chime to sound).
5. (USE PURCHASED REMOTE) Press [LOCK] and [UNLOCK] buttons simultaneously for 1 second and release (a short chime may sound).
6. Press and release any button on the same transmitter and a chime will sound after successfully programming the transmitter (locks may cycle).
NOTE: A CHIME WILL NOT SOUND ON STEP # 6 FOR THE FIRST TRANSMITTER PROGRAMMED, BUT WILL SOUND UPON PROGRAMMING THE SECOND TRANSMITTER.
7. (YOU MUST REPROGRAM ALL ORIGINAL REMOTES) Repeat steps 5 through 6 to program additional transmitters.
8. Turn ignition to OFF position. Transmitter programming mode will discontinue after 60 seconds . (All transmitter programming must be completed within time specified).

To order a remote or for more information, click on the link below:

http://www.carandtruckremotes.com/dodge-remotes-ram-truck-remotes.html

Free Programming instructions for 1999, 2000, 2001, and 2002 Dodge Ram Truck remote keyless entry fob alarm

How to program your 1999, 2000, 2001, and 2002 Dodge Ram Truck remote keyless entry fob alarm

**YOU MUST HAVE A WORKING/PROGRAMMED REMOTE IN ORDER TO PROGRAM A NEW REMOTE TO THE CAR**
**if you do not have a working remote now.. you must take the new remote to a dealer or locksmith for programming

1. Press [LOCK] button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.
2. Turn ignition to the run position (Allow ignition chimes to stop).
3. Using original (working) transmitter, press and hold the [UNLOCK] button on the transmitter for between 4 and 10 seconds.
4. Continue to hold the [UNLOCK] button and press the [PANIC] button. A chime will sound to indicate that the transmitter programming mode has been entered (Allow 3 seconds for chime to sound).
5. Press a button on all transmitters to be programmed into the system including any previously programmed transmitters; a chime will sound when each transmitter has been programmed.
6. Turn the ignition to OFF position to exit the transmitter programming mode.

To order a remote or for more information, click on the link below:

http://www.carandtruckremotes.com/dodge-remotes-ram-truck-remotes.html

Free programming information for 2007, 2008, 2009, 2010, and 2011 Dodge Nitro remote keyless entry fob fobik alarm key (with and without remote start)

Unfortunately, there are no do it yourself instructions that will work to program the 2007, 2008, 2009, 2010, and 2011 Dodge Nitro remote fobik keyless entry fob alarm smart key.
This remote must be programmed by a Chrysler/Jeep/Dodge dealer or a professional automotive locksmith.

To order a remote or for more information, click on the link below:

http://www.carandtruckremotes.com/dodge-remotes-nitro-remotes.html

Free Programming instructions for 2000, 2001, 2002, 2003, 2004, and 2005 Dodge Neon remote keyless entry fob alarm

How to program your 2000, 2001, 2002, 2003, 2004, and 2005 Dodge Neon remote keyless entry fob alarm

**YOU MUST HAVE A WORKING/PROGRAMMED REMOTE IN ORDER TO PROGRAM A NEW REMOTE TO THE CAR**
**if you do not have a working remote now.. you must take the new remote to a dealer or locksmith for programming


1. Press [LOCK] button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.
2. Turn ignition to the run position (Allow ignition chimes to stop).
3. Using original (working) transmitter, press and hold the [UNLOCK] button on the transmitter for between 4 and 10 seconds.
4. Continue to hold the [UNLOCK] button and press the [PANIC] button. A chime will sound to indicate that the transmitter programming mode has been entered (Allow 3 seconds for chime to sound).
5. Press a button on all transmitters to be programmed into the system including any previously programmed transmitters; a chime will sound when each transmitter has been programmed.
6. Turn the ignition to OFF position to exit the transmitter programming mode.

To order a remote or for more information, click on the link below:

http://www.carandtruckremotes.com/dodge-remotes-neon-remotes.html

Free Programming instructions for 1998, 1999, and 2000 Dodge Intrepid remote keyless entry fob alarm

How to program your 1998, 1999, and 2000 Dodge Intrepid remote keyless entry fob alarm

**YOU MUST HAVE A WORKING/PROGRAMMED REMOTE IN ORDER TO PROGRAM A NEW REMOTE TO THE CAR**
**if you do not have a working remote now.. you must take the new remote to a dealer or locksmith for programming

1. Press [LOCK] button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.
2. Turn ignition to the run position (Allow ignition chimes to stop).
3. Using original (working) transmitter, press and hold the [UNLOCK] button on the transmitter for between 4 and 10 seconds.
4. Continue to hold the [UNLOCK] button and press the [PANIC] button. A chime will sound to indicate that the transmitter programming mode has been entered (Allow 3 seconds for chime to sound).
5. Press a button on all transmitters to be programmed into the system including any previously programmed transmitters; a chime will sound when each transmitter has been programmed.
6. Turn the ignition to OFF position to exit the transmitter programming mode.

To order a remote or for more information, click on the link below:

http://www.carandtruckremotes.com/dodge-remotes-intrepid-remotes.html

Free programming information for 2008 Dodge Magnum remote keyless entry fob fobik alarm key smart key (with and without remote start)

Unfortunately, there are no do it yourself instructions that will work to program the 2008 Dodge Magnum remote fobik keyless entry fob alarm smart key.
This remote must be programmed by a Chrysler/Jeep/Dodge dealer or a professional automotive locksmith.

To order a remote or to learn more about this product, please click on the link below:

http://www.carandtruckremotes.com/dodge-remotes-magnum-remotes.html

Free programming information for 2009, 2010, 2011, 2012, 2013, 2014, and 2015 Dodge Journey remote keyless entry fob fobik alarm key smart key

Unfortunately, there are no do it yourself instructions that will work to program the 2009, 2010, 2011, 2012, 2013, 2014, and 2015 Dodge Journey remote fobik keyless entry fob alarm smart key.
This remote must be programmed by a Chrysler/Jeep/Dodge dealer or a professional automotive locksmith.

To order a remote or to learn more about this product, please click on the link below:

http://www.carandtruckremotes.com/dodge-remotes-journey-remotes.html