How to program your 2000, 2001, 2002, 2003, 2004, 2005, 2006 and 2007 Ford Focus remote keyless entry fob alarm by yourself at home without going to the dealer.
You must have all remote entry transmitters (maximum of 4) available before beginning this procedure.
To reprogram the remotes entry fobs:
1. Close all the doors and fasten the seat belt to ensure conflicting chimes do not sound during programming.
2. Turn the ignition lock from OFF to ON/RUN at least 4 times in 6 seconds
3. Switch off the ignition. Now the control module has entered the learning mode for 10 seconds. This mode is indicated by a chime
4. While the control module is in the learning model press and hold one of the buttons of the remote transmitter until a chime sounds. This indicated that a new remote is programmed. After each successful programming, another 10 second learning mode is automatically entered, up to 4 times (repeat step 4)
