This is how to program your 1993, 1994, and 1995 Pontiac Firebird keyless entry remote yourself at home without going to the dealer…
IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.
1. Access data link connector (DLC), located next to steering column
2. Using fused jumper (piece of wire, u shaped paper clip) jump connectors G and A in data link connector (DLC)
3. Doors will lock and unlock, indicating programming mode
4. Press any button on a remote once only,
5. Doors will lock, unlock
6. Repeat 4 for an additional remote if you have it
7. Doors will lock and unlock
8. Remove jumper