2007 and 2008 Cadillac SRX remote fob programming instructions

You can program your 2007 or 2008 Cadillac SRX remote fob at home yourself with these simple instructions:
1. Switch ignition ON
2. Continually press the vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.
3. Press set/reset button until REMOTE KEY LEARNING ACTIVE is displayed
4. Press and hold LOCK and UNLOCK on the remote transmitter simultaneously for 15 seconds or until acoustic signal is emitted (indicating remote is programmed).
5. Repeat step 5 for any other remotes you have.
6. Switch ignition OFF to exit programming mode.

There is a video below to guide you 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *

fourteen + 18 =