How to program your 1992, 1993, 1994, 1995, and 1996 (also 1997, 1998 and 1999 Old type system) Ford Econoline E-Series remote keyless entry fob alarm by yourself at home without going to the dealer.

Obtain All remote transmitters
Access programming connector located below fascia at the base of the steering column
Switch Ignition ON
Jump program connector
*Doors should lock and unlock
Press any button on the remote transmitter
*Doors should lock and unlock
Press any button on the second remote transmitter
*Doors should lock and unlock
Press any button on Third the remote transmitter
*Doors should lock and unlock
Press any button on the Fourth remote transmitter
***Note: if door locks do not operate: Press button again up to a maximum of 3 times
Switch ignition OFF
Remove jumper wire
*Doors should lock and unlock to exit programming mode