How to program your 1995, 1996, and 1997 Ford Windstar remote keyless entry fob alarm by yourself at home without going to the dealer.


Obtain all remote transmitters
Access program connector behind the glove box and taped to the wiring harness.
Switch ignition ON
Momentarily jump program connector terminals
Door should lock then unlock
Remove jump wire program connector
Press any button on the first remote transmitter
Doors should lock then unlock
Press any button on the second remote transmitter
Doors should lock then unlock
Press any button on the third remote transmitter
Doors should lock then unlock
Press any button on the fourth remote transmitter
Doors should lock then unlock
Note: if door locks do not operate: press button again up to a maximum of 3 times
Switch ignition OFF:
Doors should lock then unlock
Note: a maximum of 4 remote transmitters can be programmed
Van Minivan